Aron Alpha peripheral products
|
|
|
|
|
Various peripheral products are available for further enhancement of usability of Aron Alpha
|
|
|
Primer exclusively for Aron Alpha
|
Uses of Aron Alpha are further increased by enabling adhesion to materials normally considered difficult to obtain adhesion.
Use a primer according to the type of adherend.
| Grades |
Adherends |
| Aron Poly-Primer H |
PP, PE, olefin elastomer |
| Aron EN Primer H |
Engineered plastics such as polyacetal (POM), nylon, and PET |
| Aron Glass Primer |
Glass |
| Aron Silicone Rubber Primer |
Silicone rubber |
| Adherends |
Time to adhere(sec) |
Tensile shear strength(N/mm2) |
| Without primer |
With primer |
Without primer |
With primer |
| PP |
≧300 |
3 |
0.3 |
5.0 (destruction of materials) |
| PE |
≧300 |
3 |
0.3 |
3.0 |
| EPT rubber |
7 |
2 |
0.5 |
2.0 (destruction of materials) |
| Adherends |
Time to adhere (sec) |
Tensile shear strength(N/mm2) |
| Without primer |
With primer |
Without primer |
With primer |
| POM |
60 |
20 |
2.5 |
5.0 (destruction of materials) |
| Nylon 6 |
60 |
10 |
3.0 |
7.5 (destruction of materials) |
| PET |
20 |
10 |
1.5 |
2.0 (destruction of materials) |
|
Soak the primer first on absorbent cotton or felt and then wipe the adherend surface once or twice. After the area is dried, apply Aron Alpha. If the time that the coated surface is allowed to stand is long, its performance may be negatively affected by temperature and humidity. Promptly adhere the adherend after treating with primer.
|
|
|
|
|
Cure accelerator exclusively for Aron Alpha
|
It is a cure accelerator for Aron Alpha. It has the effect of shortening the time to adhere.
| Grades |
aa Setter |
aa Setter DM3 |
aa Accelerator |
aa Accelerator 2 |
| Solvent |
Alcohol |
Acetone |
Acetone |
Alcohol |
| Container |
Can |
Can |
Spray can |
Spray can |
Use for the following situations
Prevention of whitening (periphery of the adhesive becomes white)
Filling of areas with many cracks or adherence by building up the adhesive
For fast solidification of Aron Alpha
|
|
|
|
|
Removal liquid exclusively for Aron Alpha
|
|
Use for removing cured products, detaching adhered area, or treating the whitened peripheral area.
|
|
|
