Aron Alpha is an adhesive with alpha cyanoacrylate as the main ingredient.
Cyanoacrylate monomer (liquid) reacts with water in air or on the adherend surface, and it cures in a few seconds.
|
|
Characteristics of Aron Alpha
|
| Instant glue |
Adhesion is achieved in a few seconds. It is well suited for increasing the efficiency of the adhesion process. |
|
| Excellent workability |
It is a one-liquid type with superior workability due to its ability to adhere at normal temperature. |
|
| High adhesive strength |
It strongly adheres on a wide variety of materials. |
|
| Chemical resistance |
It is highly resistant to many chemical products. |
|
| Environmental friendliness |
It is an adhesive without any organic solvent and it has low toxicity. |
|
| Wide range of products |
Products with a wide range of viscosity are available from low viscosity to gel type products.
Products can be selected by application and function such as impact resistant type and flexible type. |
|
|
General physical properties of Aron Alpha
|
Before curing (liquid state) |
Systems |
100 series |
EXTRA® |
200 series
400X series |
500 series |
600 series |
800 series |
900P series |
GEL-10 |
| Appearance |
Colorless transparent liquid |
| Specific gravity (d204) |
1.100 |
1.050 |
1.050 |
0.978 |
1.004 |
1.069 |
1.090 |
1.090 |
| Boiling point(ºC/667Pa) |
55~57 |
60~62 |
60~62 |
78~80 |
68 |
200 |
- |
60~62 |
| Flash point(ºC)closed-cup model |
83 |
83 |
83 |
95 |
77 |
112 |
83 |
83 |
| Ignition temperature(ºC) |
465 |
485 |
485 |
410 |
463 |
330 |
330 |
485 |
| Freezing point(ºC) |
1.5 |
-29.6 |
-29.6 |
-2.1 |
-18.7 |
≦-20 |
≦-20 |
≦-20 |
| Hazard |
Hazardous material type 4, type 3 petroleum
Hazard class III, flammable liquid |
After curing (solid state) |
Appearance |
Colorless transparent solid |
| Specific gravity(d204) |
1.253 |
1.248 |
1.248 |
1.125 |
1.156 |
1.168 |
1.200 |
1.290 |
| Hardness(Shore D, 23ºC) |
90 |
90 |
90 |
80 |
80 |
60 |
30 |
90 |
| Glass transition temperature(ºC) |
170 |
140 |
140 |
125 |
115 |
80 |
80 |
140 |
| Softening temperature(ºC·Vicat method) |
165 |
145 |
145 |
110 |
110 |
60 |
- |
145 |
| Linear expansion coefficient(×10-4) |
0.9 |
1.1 |
1.1 |
1.3 |
1.5 |
1.0 |
1.1 |
1.1 |
| Dielectric tangent(10MC,10ºC) |
0.07 |
0.07 |
0.07 |
0.07 |
0.07 |
0.07 |
0.07 |
0.07 |
| Dielectric constant(10MC,10ºC) |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
3.5 |
| Dielectric breakdown voltage(kV/0.1mm,23ºC) |
14 |
14 |
14 |
14 |
14 |
14 |
14 |
14 |
| Volume insulation resistance(Ωcm·30ºC) |
1014 |
1014 |
1014 |
1014 |
1014 |
1014 |
1014 |
1014 |
| Soluble in the following solvents |
Dimethylformamide
Dimethyl sulfoxide |
Acetone, dimethylformamide, and dimethyl sulfoxide |
Faster and stronger…
select the product according to function and application
|
*Besides the major grades, various grades are available according to different adherends and setting times.
Please consult us and we will assist in the selection of the most suitable grade for your use.
|
| |
|
Applications and characteristics |
Series |
Major grades |
Functions
|
Highly functional type |
A grade with good overall balance |
EXTRA®2000 |
EXTRA®2000,EXTRA®2020 |
| Anti-impact and heat resistant type |
A grade with superior adhesive durability |
EXTRA®4000 |
EXTRA®4000,EXTRA®4020 |
| General purpose type |
Suitable for mainly adhesion on metals |
No. 100 |
101,102 |
| Can be used for a wide range of applications and adherends. |
No. 200 |
201,202,221,222,232,241,253 |
| Heat resistant and impact resistant type |
Suitable for vibrating areas such as motors and bearing |
No. 400 |
401,402,401X,402X,403X |
| Low odor and low frosting |
All-purpose type with low odor and low frosting |
No. 500 |
501,502,503 |
| Water resistant type |
Maintains strong adhesion at high humidity |
No. 600 |
601,602 |
| Odorless and non-frosting type |
A grade without problems of odor and frosting |
No. 800 |
801,802 (not suitable for some adherends; in such a case, use No. 500) |
| Flexible type |
Suitable for flexible materials such as rubber, films, and leather goods |
No. 900 |
911P2,911P3,901H2 |
| Ultra high viscosity, thixotropic type |
Suitable for permeable and porous materials |
GEL |
GEL-10 |
| Fast curing type |
To be used when faster adhesion is desired compared to the all-purpose type |
F |
201F,202F,221F,232F,252F |
| Slow curing type |
To be used when slower adhesion is desired compared to the all-purpose type |
M |
201M |
| Temporary and removable type |
Easily removable after adhesion |
S |
201S |
| Semi-structural type |
Increased peeling strength after a thermal cycle |
T |
403T,432TW |
| Medium viscosity, thixotropic type |
Excellent coating without dripping |
TX |
203TX,273FTX |
| Colored product |
To be used when a clear indication of where the adhesive was placed is desired (red and blue available) |
Special order item |
101,201 |
|
|
|
|
|
| Applications |
For wood |
Suitable for use in woodworking and wood molds |
For wood |
For wood, for wood F, for wood V, for wood molds, and for precious woods |
| For stones |
Suitable for fixation or repair of stones |
For stones |
For stones F and high viscosity type for stones |
| For cultured marble |
Suitable for processing cultured marble |
For cultured marble |
Clear type for cultured marble, white type for cultured marble, and white F type for culture marble |
| For metal plated surfaces |
To be used for adhesion of metal-plated materials |
600P system |
601P,601PF |
Brands may be discontinued without notice.
|
|
